drankin
Seahorse
Seahorse
25 Posts

plotting course on airship

[Post New]by drankin on Jan 20, 11 3:43 PM
I have put the map on the console and clicked the correct squares. But the lever doesn't do anything. When I go to plot the course, nothing happens. I click on the first point, the airship, but again, nothing happens. Totally stuck.

 
cinder555
Angelfish
Angelfish
1,217 Posts

Re:plotting course on airship

[Post New]by cinder555 on Jan 20, 11 6:08 PM
I had a hard with this too. You pulled the red lever on the left side of the chart.

You click on the panel first, place the red switch on the right side of the panel.
You click on the 4 hazards.

 
viclynn17
Seahorse
Seahorse
38 Posts

Re:plotting course on airship

[Post New]by viclynn17 on Jan 21, 11 11:23 AM
I have tried to place the map on the console and I am not able. What is wrong? I even went back and done it over with the airship 3x. Thanks. Have tried both consoles. Even said good-bye to the lady with the count.

 

Re:plotting course on airship

[Post New]by craneneck on Jan 21, 11 1:31 PM
i CAN'T PUT THE MAP DOWN EITHER!! VERY FRUSTRATING!!!! i HAD A COUPLE OF GLITCHES AND HAD TO GO BACK, BUT THIS MAP THING IS KILLING ME!!

 
viclynn17
Seahorse
Seahorse
38 Posts

Re:plotting course on airship

[Post New]by viclynn17 on Jan 21, 11 2:49 PM
I had to go all the way back to where you feed the dog and go see the lady. After that I was able to go to the ship after saying goodbye to the lady. Hope this helps. I was not going to the ship automaticly before.

Edited on 01/21/2011 at 2:49:54 PM PST


 
cinder555
Angelfish
Angelfish
1,217 Posts

Re:plotting course on airship

[Post New]by cinder555 on Jan 21, 11 4:39 PM
Check out the documents folder every once in awhile.

 
 
 
 
Go to: