Aquaball freezing up

[Post New]by smokki on May 7, 12 10:31 AM
Hi,
Just bought Aquaball, LOVE IT!!! But every time after a few minutes it freezes up! Wrote tech support, so far no reply...Updated graphics card, direct x flash and installed ms frameworks, still it crashes! I just bought this new cpu here is what it is:
CPU-Z TXT Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

CPU-Z version 1.60.1

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 2

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 5600+
Codename Windsor
Specification AMD Athlon(tm) 64 X2 Dual Core Processor 5600+
Package Socket AM2 (940)
CPUID F.3.3
Extended CPUID F.43
Brand ID 4
Core Stepping JH-F3
Technology 90 nm
Core Speed 2814.1 MHz
Multiplier x FSB 14.0 x 201.0 MHz
HT Link speed 1005.0 MHz
Stock frequency 2800 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 1024 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
Max FID 14.0x
Max VID 1.400 V
# of P-States 7
P-State FID 0x2 - VID 0x12 (5.00x - 1.100 V)
P-State FID 0xA - VID 0x10 (9.00x - 1.150 V)
P-State FID 0xC - VID 0x10 (10.00x - 1.150 V)
P-State FID 0xE - VID 0x0E (11.00x - 1.200 V)
P-State FID 0x10 - VID 0x0C (12.00x - 1.250 V)
P-State FID 0x12 - VID 0x0A (13.00x - 1.300 V)
P-State FID 0x14 - VID 0x08 (14.00x - 1.350 V)


K8 Thermal sensor yes
K8 Revision ID 5.3
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3


Thread dumps
-------------------------------------------------------------------------

CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 02002008h
Max CPUID level 00000001h
Max CPUID ext. level 800

 
 
 
 
Go to: