Aquaball freezing up |
|
![[Post New]](/templates/wanda/images/icon_minipost_new.gif){kind=icon} by smokki on May 7, 12 10:31 AM
|
|
|
Hi,
Just bought Aquaball, LOVE IT!!! But every time after a few minutes it freezes up! Wrote tech support, so far no reply...Updated graphics card, direct x flash and installed ms frameworks, still it crashes! I just bought this new cpu here is what it is: CPU-Z TXT Report ------------------------------------------------------------------------- Binaries ------------------------------------------------------------------------- CPU-Z version 1.60.1 Processors ------------------------------------------------------------------------- Number of processors 1 Number of threads 2 APICs ------------------------------------------------------------------------- Processor 0 -- Core 0 -- Thread 0 0 -- Core 1 -- Thread 0 1 Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 2 (max 2) Number of threads 2 (max 2) Name AMD Athlon 64 X2 5600+ Codename Windsor Specification AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ Package Socket AM2 (940) CPUID F.3.3 Extended CPUID F.43 Brand ID 4 Core Stepping JH-F3 Technology 90 nm Core Speed 2814.1 MHz Multiplier x FSB 14.0 x 201.0 MHz HT Link speed 1005.0 MHz Stock frequency 2800 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L2 cache 2 x 1024 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 14.0x Max VID 1.400 V # of P-States 7 P-State FID 0x2 - VID 0x12 (5.00x - 1.100 V) P-State FID 0xA - VID 0x10 (9.00x - 1.150 V) P-State FID 0xC - VID 0x10 (10.00x - 1.150 V) P-State FID 0xE - VID 0x0E (11.00x - 1.200 V) P-State FID 0x10 - VID 0x0C (12.00x - 1.250 V) P-State FID 0x12 - VID 0x0A (13.00x - 1.300 V) P-State FID 0x14 - VID 0x08 (14.00x - 1.350 V) K8 Thermal sensor yes K8 Revision ID 5.3 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Thread dumps ------------------------------------------------------------------------- CPU Thread 0 APIC ID 0 Topology Processor ID 0, Core ID 0, Thread ID 0 Type 02002008h Max CPUID level 00000001h Max CPUID ext. level 800 |
|
|
|
|
|
|
|
|
