lolaluv
Guppy
Guppy
109 Posts

Cannot set dial to -3 to -5

[Post New]by lolaluv on May 18, 16 8:44 AM
I've tried nearly every point on the darned dial, is anyone this far and can help tell me where to set it so I can use the unknown compound? Please and thank you.

 

Re:Cannot set dial to -3 to -5

[Post New]by marijkee123 on May 18, 16 11:43 AM
Hi, you click 2 or 3 times on the manometer in the same room. Hope it helps.

 
skpjazz
Parrotfish
Parrotfish
491 Posts

Re:Cannot set dial to -3 to -5

[Post New]by skpjazz on May 18, 16 4:09 PM
The ? (hint) shows the correct setting.

 
pfalcioni
Minnow
Minnow
287 Posts

Re:Cannot set dial to -3 to -5

[Post New]by pfalcioni on May 18, 16 7:20 PM
If you don't want to use a hint, go back to the machine that creates the sample (same room, to the right of the thermostat), it displays the room temperature so you can see if you need to adjust up or down.

 
pgillenw
Minnow
Minnow
236 Posts

Re:Cannot set dial to -3 to -5

[Post New]by pgillenw on May 19, 16 10:26 PM
I don't get this at all.

Successful with setting 15 - 20 and accessing the frozen room. Managed to obtain a sample stuff in a vial.

Discovered the other machine --- have tried many settings to get to the suggested -5 -3 range --- now what?

Edited on 05/19/2016 at 10:40:35 PM PST


 
mdamlady
Seahorse
Seahorse
37 Posts

Re:Cannot set dial to -3 to -5

[Post New]by mdamlady on May 20, 16 10:17 AM
I'm with you all!!

I have the vial of "stuff"!!

Moved the dial into every position, but nothing.

But can't move ahead as I have no idea what we're supposed to do with it.


 
nwl43
Stingray
Stingray
4,931 Posts

Re:Cannot set dial to -3 to -5

[Post New]by nwl43 on May 20, 16 10:22 AM
pgillenw wrote:I don't get this at all.

Successful with setting 15 - 20 and accessing the frozen room. Managed to obtain a sample stuff in a vial.

Discovered the other machine --- have tried many settings to get to the suggested -5 -3 range --- now what?


Go back to the machine where you obtained the sample vial. Click the red button. The temp will be displayed on the green rectangle. Go back to temp setting machine. Move the needle a small amount. Go back and check the actual temp. Keep going back and forth and moving the need one space at a time until the actual temp reads -4.

 
mdamlady
Seahorse
Seahorse
37 Posts

Re:Cannot set dial to -3 to -5

[Post New]by mdamlady on May 20, 16 10:57 AM
Thank you!!

Hope I can do it!!

 
 
 
 
Go to: