bachlein
Guppy
Guppy
151 Posts

bubble machine in museum

[Post New]by bachlein on Sep 23, 17 10:22 AM
I don't know how to do this. I think I've tried every combination but nothing seems to work...and I can't "understand" what the bubbles in the book to the left of the machine mean.

 
sazoria
Clownfish
Clownfish
649 Posts

Re:bubble machine in museum

[Post New]by sazoria on Sep 23, 17 2:49 PM
Bubble machine-

You have to match the appearance of the three streams of bubbles in the machine, to that of the three streams in the tank to the left of it.

The bubble streams can be in 1 of three intensities.
1= 1 bubble per couple of seconds. (we'll refer to this as Low setting from now on)
2= about 4 bubbles per couple of seconds (medium)
3= continuous stream of bubbles. (high)

In order to set the streams in the bubble machine you need to know what controls correspond to what-
The slider at the top of the screen adjusts the intensity level of each stream-
the left most position is the low setting, the middle position is medium intensity and the right position is high.

The three buttons at the bottom of the machine relate to which stream number you wish to set-
so the left most button is for the left most stream in the machine, the middle is for the middle stream and the rightmost button is for the rightmost bubble stream.

So if you move the slider to the right position and then press the middle button, you will have set the highest intensity (continuous bubble stream) for the middle bubble stream. It's pretty simple when you get the hang of which control does what, just a matter of sliding one thing and pressing a button for each stream and your done.
You use the slider first, to pick what intensity you want to set, and then click the appropriate button, in order to apply that intensity to a bubble stream. Just match the bubble intensities in the machine, to those shown in the tank.

If you still aren't sure then I will put the instructions for getting the bubble settings to match the tank, assuming that the bubble code doesn't change for each game.
If you want to know then highlight underneath this text for answer-

Bubble stream on the left should be lowest intensity so set slider to left position and click left button.
Bubble stream in middle should be highest intensity so set slider to right and click on middle button.
Bubble stream on right should be medium intensity so set slider in middle position and click right button.

 
 
 
 
Go to: